江苏南京空压机诚信厂

1 “安充电桩需要协调多方”

"The charging pile needs to be coordinated."

充电桩不是以为在地面打几个孔固定充电桩，再拉一个电线就可以的，实际上面，协调的工作量相当大，主要有四个部门的，使用者自己、汽车企业、电力公司和物业产权方。申请方面直接像你所在市的店里公司申请，然后转给供电局，之后就会技术工程师看现场，提供施工方案，如果你是在小区安装，还需要取的开发商的同意。

Not think charging pile in pile holes in the ground to play a fixed charge, and pull a wire can, actual, coordinate the workload is quite large, mainly has four departments, the users themselves, car companies, power companies and property property right. Application aspects of direct application like in your city, the store company, and then transferred to power supply bureau, after will look at the site technical engineers, provide the construction plan, if you are in the neighborhood installation, also need to get the consent of the developer.

电动汽车充电桩安装流程

Electric car charging pile installation process

2 “居民担心380伏电压会否触电”

"Residents are concerned that 380 volts will be electrocuted."

因为充电桩的充电电压是380伏、电流为36安培比居民用电的电压高、电流强，所以需要物业管理公司和消防部门协调，因为很多朋友只有听过电动汽车，对于其并不真正的了解，而对于连接充电桩的电缆采取高处走线，所以需要消防部门出具的安全说明。

Because of charging voltage is 380 v, current charging pile is 36 amp than residents of high electric voltage, electric current, and therefore require property management companies and the fire department coordination, because a lot of friends only heard of the electric car, for it is not really understanding, and for charging pile of cable connected to upwards, so you need to fire department issued by the safety instructions.

3 “安装费掏了1万多元”

3 "installation costs 10,000 yuan"

　　充电桩需要配电室重新基础配电，因为每个小区的用电负荷在安装前都是计算好的，如果小区内使用100伏电压的话，只给你配120伏的电开关。所以充电桩380伏的高电压必须单独走电，即另外布设一个开关，这部分涉及费用8000多元，由我们自己承担。然后，电力公司把电线从开关处拉到充电桩大概200米，这个施工费用包括充电桩的硬件设施成本都是电力公司承担，大概6万多元，这其中国家对电力公司有相应的贴补政策。同时还需要支付物业费用的

Charging piles need based distribution transformer room again, because every village before installation of electricity load is good, if use 100 v voltage in the district, only with 120 v electric switch for you. So the high voltage of the charging pile 380 volts must be powered by a separate switch, which involves a cost of more than 8,000 yuan, which we will cover ourselves. Then, power companies to pull the wires from the switch to charge about 200 meters, the construction costs include the cost of hardware charging pile are electric power company, probably more than 60000 yuan, the country is the corresponding financial support policy for electric power company. You also have to pay for the property

电动汽车充电桩安装流程

Electric car charging pile installation process

4

4

　4 “施工难度大”

4 "construction is difficult"

　　施工过程中，我们要协调安装配电柜的空间，并请车主们挪开车辆方便施工。连接充电桩的电缆比小孩子的胳膊粗，每个充电桩的电流为36安培，4个就是144安培，今后还会增加充电桩的数量，没有这么粗的电缆无法承受更大电流。电缆并不是铺设在地面上，而是从空中架过来的，因为地下停车场进进出出的车辆很多，铺设在地面上，一旦电缆被压坏后果不堪设想，从空中架过来，工作量大了很多，但为了安全起见还是值得。为了从空中架电缆，4位工人师傅花了4天时间把以前布置的电线槽重新剥开，铺设电缆。

During the construction, we should coordinate the space of the distribution cabinet and ask the owners to remove the vehicle for construction. Connection cable than a child's arm, charging pile each charging current is 36 amp, 4 is 144 amps, the future will also increase the number of charging pile, not so thick cable cannot take more current. Cable is not laying on the ground, but from the air, because the underground parking vehicles in and out of many, laying on the ground, once the cable is bad consequences, from the air plane to come over, a much greater workload, but to be on the safe side is worth. In order to get the cable from the air, four workers spent four days restripping and laying cables from the wire grooves that had been assigned.